Anyone with even the most minimal knowledge of antiques will know that they have to be treasured and well looked after. Being over a hundred years old, they will need regular restoration as well as routine cleaning whatever your use for them. Eventually they will also need antique furniture hardware product restoration to save them from irreparable damage. Think of it as surgery for furniture!
Antique furniture hardware product restoration is a chore simply because it may prove impossible to get hold of the parts needed to actually complete the process. Doorknobs, latches, hinges, hooks and chest lifts are all rare unless you manage to get lucky and find a dealer with a similar piece that is irreparable. Despite the availability status of the parts you need, there are still some essential nuggets of knowledge you should know before attempting antique furniture hardware product restoration. For more info see http://www.antiquefurniturersource.com/Antique_Furniture_Collections/ on Antique Furniture Collections
1. Always search for the materials you need for antique furniture hardware product restoration from home. Availability may mean that trawling the various shops is a complete waste of time. Try calling local antique dealers and stores and then contact those further away if need be. You could also try searching on the Internet. Always narrow your search to those that specialise in the era of your particular piece first as they will often yield more success.
2. Be prepared to travel to pick up the materials you need for antique furniture hardware product restoration. You may want to have the parts mailed to you if they are found in another country, but always be prepared to do anything to protect your investment.
3. Ask a professional for advice. Antique furniture hardware product restoration is a complex process and it only takes one small mistake to permanently ruin your piece so make sure that you seek advice and maybe the services of a professional. Several experts would be prepared to give you quotes so check up on them before selecting a man for the job if you do not want to attempt it yourself.
4. Be prepared to pay out. Antique furniture hardware product restoration is an expensive business. It is usually worth every penny to save your investment but you should be prepared for a hefty bill.
There is one golden rule when it comes to looking after your pieces of antique furniture. Prevention is better than cure. This is the golden rule and following these tips may just help you to prevent the need for antique furniture hardware product restoration arising:
1. Establish a routine and stick to it as far as cleaning goes. Always use a soft cloth to wipe down antique furniture once or twice a week.
2. Wax every antique piece you have every two months with a small measure of furniture wax. This will prevent build up and keep your furniture healthy.
3. Keep antiques out of direct sunlight because they may fade.
4. Do not use any harsh solvents, detergents or polishes because the chemicals may just stain it permanently.
If a person is interested in going into business on their own, there are countless types to choose from. Many people like the convenience of working from home. One great home business, provided a person has a separate space from their home, such as a garage, basement or workshop because of the chemicals, is a furniture builder and finisher. Of course the person would have to either take classes to learn this particular trade, unless they already have experience in it. There is not a lot that you need in order to get started, except for of course your wood and related supplies. There is a great deal of equipment that is needed in order for a person to start their own furniture building and finishing business. Of course every business needs the convenient office equipment, like computers, copy machines, fax machines, etc. But when you’ve got a business building and finishing furniture, there is a variety of shop-type equipment and supplies that you will need. You will need various types of saws, which includes different size blades. This will enable you to create different types of designs. You will also need a dependable drill as well as drill bits in order to bore holes into the wood so that you can assemble the furniture or place decorative hardware onto it.
Another piece of equipment that you would need for a successful business in furniture is a sander. You certainly can’t apply stain or finish to a rough piece of wood that hasn’t been sanded. The customer wouldn’t be too happy about this type of quality. The sander would allow you to sand the furniture after building it, which is part of the prepping process. The customer could request to have a piece of furniture distressed, and there are special tools used for this as well. After this step, you would either wipe or spray stain onto the furniture, using a spray gun. There are several types of spray guns, and they are used for the stain application to ensure that it goes on smoothly and evenly. Next, there is what is called a sealer gun, which is a special spray gun that is used to seal and apply top coat to the piece of furniture.
A person with their own business could probably really benefit from an accountant to handle all of their taxes, as well as a person to take care of payroll, should you grow to the point of needing to hire employees.
If you are interested in assembling furniture for your children on your own, there are five major steps you will need to follow in order to have the greatest amount of success.
Step 1: Sort Out Your Materials
Most of your materials should be included with your flat pack furniture. The furniture should come with an instruction manual that will contain a list of all of the materials. These materials may be coded for later use. Identify all of the included pieces and sort them by putting the same pieces together and determining the special code that is associated with them.
In addition, if you need any extra tools, be certain you have them gathered before you get started. Included tools are often smaller than normal, more difficult to work with, and are meant to be throw-away tools. You may wan to invest in a set of tools to help you complete the assembly faster. You can choose from hand tools or power tools. A good power tool set will have various size bits for a screwdriver, drill bits, sockets, and allen wrenches. If you don’t already have a complete power tool set, you may prefer to hire a professional over buying new tools.
Step 2: Read Through the Directions
Before you begin the assembly process, read through the directions one time to make certain you understand them. Some of the instructions will become clearer as you get to that step in the process, but having a good idea of what is coming with the instructions will help you in the process.
This is also a good time to pull out each piece and lay them out so you can find everything. Pieces are usually marked with a letter or number so make sure you can see the markings. Sort like items together. Hardware like screws, nuts, bolts, and nails should all be kept together. If you lose a few hardware pieces, you may not be able to complete the project.
Step 3: Follow the Directions
Resist the temptation to jump right into the project or to skip steps. The directions were written in the order provided for a reason. Follow that order to make sure you do not accidentally miss a step along the way.
Step 4: Don’t Do Anything Permanent Right Away
When it comes to tightening bolts or other hardware, it is generally best to loosely put them in place until you are certain you have assembled the furniture correctly. This way, it will be easier to undo if you find that you have made a mistake. Once you are certain everything is in place, you can tighten the bolts and other hardware in place.
Step 5: Check it Over
Before you let your children use the furniture, be certain to check it over for safety and security. After all, you don’t want your child to get harmed by the furniture because you did something incorrectly. Make sure nothing is sticking out that could harm your child and check the furniture for stability to be certain it will be able to properly support your child.
By following these five simple steps, you will find the process of assembling your child’s furniture to be less frustrating and, you will be a hero with your child when the furniture is complete!
Hand-forged iron hardware is a way to add personalization and uniqueness to any home or building. From Art and Crafts to Contemporary, It can reflect any design style. Hand-forged iron hardware is so versatile that the possibilities for using it seem only limited by the imagination. Stair railings, cabinet pulls, balcony detailing, doorknobs, towel bars, and lighting fixtures can all be made using hand-forged iron. The lasting quality of hand-forged iron, both in look and durability make it a perfect choice for adding an extra touch to a home, building, or yard.
Cabinet pulls are a lovely way of using hand-forged iron to personalize a kitchen. Chosen to reflect the personality of the house’s cook or simply chosen to mimic the house’s dcor, cabinet pulls are a detail that designers love to use. Since hand-forged iron hardware wears so well with repeated touching, it is the perfect material for kitchen or bathroom cabinets. Care of hand-forged iron hardware usually involves nothing more than rubbing it with furniture polish.
Staircases are a great place to use hand-forged iron hardware in a home. So many historic homes used these types of railings in their staircases, and any homeowner wanting to mimic period styles will do well to consider hand-forged iron. Important to this process is for the homeowner to provide a designer with photos or drawings so that they are sure to design the railings in accordance with what the homeowner wants.
For the homeowner that wishes to renovate but only has a small budget, an inexpensive way to enhance a room is to change the existing hardware to add some custom-made hand-forged iron hardware. The contrast that iron makes with other materials such as wood adds beauty and character to any room.
Using hand-forged iron hardware outside is another way to add detail to a home. Because iron does not rust, it will continue to look exceptional for years. Caring for iron usually involves treating it with linseed oil for several years, but after that, such care isn’t usually necessary. When designing balconies or porches, it is often the case that something is missing. Using hand-forged iron hardware is a perfect way to enhance a balcony railing. Again, finding photos of such detailing is essential in the design process. A doorknocker is another outside use for hand-forged iron hardware.
Hand-forged iron hardware is handmade by craftsmen. They are trained using the forging methods of historic blacksmiths. These artisans use the finest materials and methods, and properly constructed iron hardware should last several lifetimes. It is important for homeowners considering hand-forged iron hardware to research reputable craftsmen.
Whether it is a simple towel rack or a spiral staircase railing, using hand-forged iron hardware is a way to add beauty, character and personalization to any home. Its durability will allow it to last for years as it provides a conversation piece for home, yard or office. Home or building owners cannot go wrong in choosing to use this time-honored craft.